Elegoo
Elegoo Mars 5 Ultra
Compact resin printer with a 7 in 9K mono LCD, 18 µm XY detail, 150 mm/h speed, AI camera and auto leveling.
$284Price checked October 28, 2026
Best for Tabletop gaming miniaturesBest for High-detail small partsBest for First resin printer with a cameraBest for Jewelry and figurine masters
Overview
The Mars 5 Ultra pairs a 7 in 9K monochrome LCD (8520 x 4320) with 18 µm XY resolution in a compact resin printer. Elegoo rates it at up to 150 mm/h and includes an AI camera and auto leveling. It sells for $284 on Elegoo's US store, against a $338 regular price.
What it is
The Elegoo Mars 5 Ultra is the higher-spec model in Elegoo's compact Mars 5 resin series. Like the base Mars 5, it is an MSLA printer that cures resin through a monochrome LCD mask. It moves up to a 7 in 9K screen and adds features Elegoo promotes as "blazing speed at 150mm/h, AI camera & auto leveling." It is currently listed and in stock on Elegoo's US store.
Key specs that matter
- LCD: 7 in 9K monochrome panel at 8520 x 4320 pixels, per Elegoo's official replacement LCD listing for the Mars 5 Ultra.
- XY resolution: 18 µm, about half the pixel size of the base Mars 5's 35 µm. That means visibly finer edges on small details such as faces and lettering.
- Speed: up to 150 mm/h, according to Elegoo. Resin speed is measured in vertical millimeters per hour and cannot be compared with FDM mm/s figures.
- Leveling: automatic leveling. Tom's Hardware notes that the unit ships factory leveled.
- Camera: a built-in AI camera that Elegoo markets for print monitoring and failure detection.
- Layer release: Tom's Hardware describes a tilt release mechanism that rocks the plate to peel layers from the vat film. Faster release is part of how the printer reaches its speed rating.
Who it suits
The Mars 5 Ultra fits tabletop gamers, miniature painters and hobbyists who want very fine detail on small parts without moving to a large-format printer. Tom's Hardware's review frames it as close to plug and play and a good first resin printer for gamers. The 18 µm pixel size is a clear step up from 4K-class printers when printing 28 mm or 32 mm scale figures.
What to know before buying
The build area is small. A 7 in screen limits how many miniatures fit on one plate, and taller models are limited by the Z height. Elegoo's readable store pages did not list the exact build volume, so confirm it if you plan to print a specific part.
Tom's Hardware reported that prints were hard to remove from the laser-etched build plate with default settings, and the reviewer reduced the first-layer exposure to fix it. The review also noted that the camera's failure detection only works once a model rises above the vat edge. At the time of the review, the camera also did not work with Lychee Slicer, and remote monitoring went through Chitubox Manager over Wi-Fi.
As with any resin printer, budget for gloves, ventilation, a washing method and UV curing. Elegoo sells a Mars 5 Ultra Complete Bundle with a Mercury XS wash and cure station and resin for $437 (regular $630) on its US store, which is a simple way to buy the full setup at once. Replacement 9K LCD screens are also sold on Elegoo's own store.
Specifications
| Type | resin |
|---|---|
| Price | $284 |
| Build volume | 153×77×165 mm |
| Max speed | Not listed |
| Multicolor | No |
| Enclosed | Yes |
| Auto bed leveling | Yes |
| Connectivity | Wi-Fi, USB |
| Noise | Not listed |
| Release year | 2024 |
Pros and cons
Pros
- The 7 in 9K mono LCD at 8520 x 4320 delivers 18 µm XY detail, sharp enough for small gaming miniatures.
- Elegoo rates it at up to 150 mm/h, helped by a tilt release that Tom's Hardware describes peeling layers from the film.
- Automatic leveling and a factory-leveled plate, noted by Tom's Hardware, keep first-time setup short for new resin users.
- A built-in AI camera supports remote monitoring and failed-print detection without buying a separate camera.
- At $284 on Elegoo's US store, it costs about $100 more than the Mars 5 for roughly half the pixel size.
- Elegoo sells a complete bundle with a Mercury XS wash and cure station, which simplifies buying a full resin setup.
Cons
- The compact 7 in screen limits plate area, so large models and big miniature batches need multiple print runs.
- Tom's Hardware found prints hard to remove from the laser-etched plate with default settings until first-layer exposure was reduced.
- Tom's Hardware notes the camera only detects failed prints once the model rises above the vat edge.
- At review time, the camera did not work with Lychee Slicer and relied on Chitubox Manager over Wi-Fi.
- Elegoo's readable store pages do not list the build volume, so buyers must verify size limits before ordering.
- Resin printing still needs gloves, ventilation, washing and UV curing, which adds cost and workspace beyond the printer.
Frequently asked questions
How fast is the Elegoo Mars 5 Ultra?
Elegoo rates the Mars 5 Ultra at up to 150 mm/h. Resin printers measure speed in vertical millimeters per hour, so this figure cannot be compared with FDM speeds in mm/s. Real speed depends on resin type and exposure settings.
What resolution is the Mars 5 Ultra?
Elegoo lists a 7 in 9K monochrome LCD at 8520 x 4320 pixels with an 18 µm XY resolution. That is about half the pixel size of the base Mars 5.
Does the Mars 5 Ultra have Wi-Fi and a camera?
It has a built-in AI camera, which Elegoo markets for monitoring and failure detection. Tom's Hardware's review lists USB and Wi-Fi file transfer, with remote monitoring through Chitubox Manager.
Is the Mars 5 Ultra good for beginners?
Tom's Hardware describes it as nearly plug and play and recommends it as a first resin printer for tabletop gamers. Auto leveling helps, but beginners still need to learn safe resin handling, washing and curing.
Can I buy it with a wash and cure station?
Yes. Elegoo's US store sells a Mars 5 Ultra Complete Bundle with a Mercury XS wash and cure station and resin, listed at $437 (regular $630) on 2026-10-28.
Sources
Verdict
The Mars 5 Ultra suits hobbyists who print small, highly detailed models and want an 18 µm screen, camera and auto leveling at under $300. Anyone who needs to print large figures or full plates of parts at once should look at a larger format such as the Saturn 4 Ultra.
Comparisons
Featured in
Related printers
