
Elegoo
China · Founded 2015
Elegoo is a Shenzhen company founded in 2015 that makes resin printers (Mars, Saturn), FDM printers (Neptune, Centauri Carbon) and electronics kits for makers and students.
Who they are
According to its About page, Elegoo "started up in 2015", when Chris Hong founded the company in Shenzhen, China. The page describes its products as 3D printers and related products for consumers, plus electronic and structural kits for makers and students. The page promotes the Centauri Carbon 2, the Centauri Carbon 2 Combo and the M1 Ultra 3D scanner, and its product listings include the Saturn 4 Ultra 16K and Jupiter 2 resin printers. Elegoo also sells its own filament and resin.
The current lineup on this site
Every Elegoo printer with a page on 3DPrinterLab, with its status on the official US store (us.elegoo.com) in late October 2026. Prices are at the time of writing (October 2026).
- Elegoo Mars 5: sold. $184.
- Elegoo Mars 5 Ultra: sold. $284.
- Elegoo Saturn 4 Ultra: sold (12K version). $593.99. Elegoo also sells a separate Saturn 4 Ultra 16K.
- Elegoo Neptune 4 Pro: sold (Type-C version). $239.
- Elegoo Neptune 4 Max: sold (Type-C version). $394.
- Elegoo Centauri Carbon 2: sold. $349 for the base printer; a Combo with CANVAS is also listed.
- Elegoo Centauri Carbon: no longer sold new on the US store. The US product URL returns an error, and the only listing left is an out-of-stock pre-owned unit.
What the lineup is built around
Elegoo is split between resin and FDM, and both halves are sized as ladders.
- Mars and Saturn resin printers. These are monochrome LCD (MSLA) printers. The Mars 5 uses a 6.6 inch 4K screen (35 µm XY), the Mars 5 Ultra a 7 inch 9K screen (18 µm XY), and the Saturn 4 Ultra a 10 inch 12K screen (19 µm XY) with a 218.88 x 122.88 x 220 mm build volume. Elegoo states a top speed of 150 mm/h for the Mars 5 Ultra and Saturn 4 Ultra.
- Neptune 4 series (open frame). The Neptune 4 Pro (225 x 225 x 265 mm) and Neptune 4 Max (420 x 420 x 480 mm) are open-frame, moving-bed printers that run Klipper-based firmware, with a stated 500 mm/s top speed and a 300 °C nozzle. The Neptune 4 Max is the largest-volume printer on this site.
- Centauri Carbon line (enclosed CoreXY). The Centauri Carbon 2 is an enclosed CoreXY printer with a 256 x 256 x 256 mm build volume, a 350 °C nozzle and a 110 °C bed. It is "multicolor upgrade ready" with Elegoo's CANVAS system, which adds four colors and is sold separately or in the Combo.
Which model fits which buyer
- First resin printer on a budget: the Mars 5, with the smallest screen and lowest price in Elegoo's resin range on this site.
- Miniatures and fine detail: the Mars 5 Ultra or Saturn 4 Ultra, whose 18 µm and 19 µm XY figures are finer than the Mars 5's 35 µm.
- Large FDM parts: the Neptune 4 Max, with its 420 x 420 x 480 mm build volume.
- Enclosed FDM for ABS or ASA: the Centauri Carbon 2.
Buying and support
Elegoo sells direct in the US through us.elegoo.com, which also has a Certified Pre-Owned collection. Elegoo's Refund and Warranty page publishes a component-by-component warranty table, so coverage depends on the part; the same table lists no warranty for pre-owned 3D products. Check the table for your model before buying, and keep your order number for any claim.
Elegoo also sells resin bundles that pair the Mars and Saturn printers with Mercury wash and cure stations, which cuts the number of separate purchases for a first resin setup.
What changed in 2026
- Centauri Carbon 2 replaced the Centauri Carbon. Elegoo's site banner promotes the Centauri Carbon 2 as the new release, the US store's Centauri series collection lists only the Centauri Carbon 2 and Centauri 2 families, and the original Centauri Carbon is no longer sold new there. The newer model raises the maximum nozzle temperature from 320 °C to 350 °C and is built to accept CANVAS.
- Saturn 4 Ultra 16K. Elegoo added a 16K version of the Saturn 4 Ultra alongside the 12K model on this site, and its banner promotes it as a best seller.
- Neptune 4 ribbon-cable versions. The Neptune 4 Pro and Neptune 4 Max are now sold in Type-C versions; the ribbon-cable versions showed as unavailable.
To pick between Elegoo's resin printers, see Mars 5 Ultra vs Saturn 4 Ultra. For the enclosed FDM side, see Centauri Carbon 2 vs Bambu Lab P2S, and browse our best resin 3D printers.
Elegoo printers
Frequently asked questions
Where is Elegoo based?
Elegoo is based in Shenzhen, China. Its About page says founder Chris Hong started the company there in 2015.
Is the Elegoo Centauri Carbon discontinued?
It is no longer sold new on Elegoo's US store, where the product URL returns an error and only a pre-owned unit was listed. Elegoo now promotes the Centauri Carbon 2 as its new release.
Does Elegoo make resin or FDM printers?
Both. Its resin printers are the Mars and Saturn lines, and its FDM printers are the Neptune and Centauri Carbon lines.
What is Elegoo CANVAS?
CANVAS is Elegoo's multicolor add-on for the Centauri Carbon line. It handles four colors and is sold separately or bundled in the Centauri Carbon 2 Combo.
Do Elegoo pre-owned printers have a warranty?
According to the warranty table on Elegoo's US Refund and Warranty page, pre-owned 3D products carry no warranty. New products are covered according to the component table on the same page.
Sources
- About Elegoo (official)
- Elegoo Refund & Warranty (official US store)
- Elegoo Centauri series collection, US store (official)
- Elegoo Centauri Carbon 2, US store (official)
- Elegoo Saturn 4 Ultra 12K, US store (official)
- Elegoo Mars 5 Ultra, US store (official)
- Elegoo Neptune 4 Max, US store (official)
- Elegoo Certified Pre-Owned 3D printers, US store (official)





