Flashforge
Flashforge Adventurer 5M Pro
Enclosed CoreXY 220 mm cube printer with HEPA and carbon filtration, camera and ABS/ASA support
$379Price checked October 28, 2026
Best for ABS and ASA functional partsBest for Classrooms and officesBest for Remote-monitored printingBest for Beginners wanting an enclosure
Overview
The Flashforge Adventurer 5M Pro is a fully enclosed CoreXY printer with a 220 x 220 x 220 mm build volume, 600 mm/s max travel speed and 20,000 mm/s² acceleration. It adds HEPA and activated carbon filtration, a built-in camera and listed ABS and ASA support, with a 280°C hotend and 100°C bed.
What it is
The Flashforge Adventurer 5M Pro is the enclosed version of the Adventurer 5M. Flashforge's US store describes a fully enclosed CoreXY metal frame with a 220 x 220 x 220 mm build volume, a single direct-drive extruder, full-auto bed leveling and a flexible PEI steel plate. It is listed for sale on flashforge.com at $379, down from a regular $529.
Key specs that matter
- Build volume: 220 x 220 x 220 mm.
- Speed: Flashforge lists 600 mm/s maximum travel speed and 20,000 mm/s² acceleration. The spec table gives no separate maximum print speed.
- Temperatures: 280°C hotend and 100°C bed. Flashforge says the sealed chamber retains internal heat but gives no chamber temperature figure and does not describe active chamber heating.
- Filtration: Internal and external air circulation with HEPA and activated carbon filters, which Flashforge says trap 99% of particles and VOCs.
- Camera: Built in, for real-time monitoring and time-lapse recording.
- Noise: 50 dB in low-noise mode and 55 dB in standard mode, according to Flashforge.
- Nozzles: 0.25, 0.4, 0.6 and 0.8 mm.
- Materials: PLA and PETG with the 0.4 mm nozzle, ABS and ASA, and TPU, PLA-CF and PETG-CF with the 0.6 or 0.8 mm nozzle.
- Connectivity: Wi-Fi, Ethernet and USB, with a 4.3-inch touchscreen.
- Slicers: FlashPrint 5, Orca-Flashforge and Orca Slicer.
Who it suits
The 5M Pro suits buyers who want an enclosed printer for a home, office or classroom at a moderate price. The enclosure and filtration make ABS and ASA more practical than on open-frame printers, and the built-in camera allows remote monitoring. Its dual power supply rating (100 to 120 V or 200 to 240 V) and wired Ethernet also suit schools and shared workspaces.
What to know before buying
- Single color only: No multicolor system is listed for this model. Flashforge's AD5X is its multicolor option, but it is open-frame.
- Temperature limits: The 280°C hotend and 100°C bed cover ABS and ASA, but higher-temperature materials such as polycarbonate or nylon blends are not on the supported list.
- Build size: The 220 mm cube means large parts may need to be split.
- Footprint: The printer measures 380 x 400 x 453 mm excluding the spool holder.
- Filter upkeep: HEPA and activated carbon filters lose effectiveness over time and need periodic replacement.
- Automatic shutdown: Supported, along with filament run-out reminders and power-loss recovery.
- Versus the Adventurer 5M: The 5M Pro shares the same build volume, hotend and bed temperatures as the open-frame 5M. The extra cost goes to the enclosure, filtration, camera and ABS and ASA support, so buyers who only print PLA and PETG may not need it.
- Warranty: Flashforge lists a 1-year limited warranty on the printer and 3 months on extruder parts.
Specifications
| Type | FDM |
|---|---|
| Price | $379 |
| Build volume | 220×220×220 mm |
| Max speed | 600 mm/s |
| Multicolor | No |
| Enclosed | Yes |
| Auto bed leveling | Yes |
| Connectivity | Wi-Fi, Ethernet, USB |
| Noise | 55 dB |
| Release year | 2023 |
Pros and cons
Pros
- The fully enclosed CoreXY metal frame makes ABS and ASA practical, which Flashforge lists as supported.
- HEPA and activated carbon filtration with internal and external circulation targets particles and VOCs.
- A built-in camera provides real-time monitoring and time-lapse recording without extra accessories.
- Flashforge lists 50 dB in low-noise mode, which helps in shared rooms and home offices.
- Wi-Fi, Ethernet and USB plus FlashPrint 5 and Orca-based slicers give flexible workflows.
- Nozzle sizes from 0.25 mm to 0.8 mm cover fine detail, fiber-filled and fast prints.
Cons
- A 220 x 220 x 220 mm build volume limits large parts, which may need to be split.
- The 280°C hotend and 100°C bed leave higher-temperature materials such as polycarbonate off the supported list.
- There is no multicolor system for this model, so color changes require manual swaps.
- Flashforge gives no chamber temperature figure and does not list active chamber heating.
- HEPA and activated carbon filters are consumables that need periodic replacement to stay effective.
- Standard-mode noise is listed at 55 dB, louder than its low-noise mode.
Frequently asked questions
Can the Adventurer 5M Pro print ABS and ASA?
Yes. Flashforge lists ABS and ASA as supported materials. The enclosure helps hold heat to reduce warping, and HEPA plus activated carbon filtration helps manage fumes.
Does the 5M Pro have a camera?
Yes. Flashforge lists a built-in camera for real-time monitoring and time-lapse recording.
How loud is the Adventurer 5M Pro?
Flashforge lists 50 dB in low-noise mode and 55 dB in standard mode. Actual noise depends on speed settings and where the printer sits.
Does it work with third-party filament and slicers?
Flashforge lists material types rather than requiring its own brand, so standard third-party PLA, PETG, ABS and ASA can be used. Supported slicers include FlashPrint 5, Orca-Flashforge and Orca Slicer.
Can the 5M Pro print in multiple colors?
No multicolor system is listed for the 5M Pro. Flashforge's AD5X includes a four-color system, but it is open-frame and does not list ABS or ASA.
Sources
Verdict
The Adventurer 5M Pro suits buyers who want an affordable enclosed printer with filtration and a camera for PLA, PETG, ABS and ASA. Anyone who needs multicolor printing, a larger build volume or materials above 280°C should look elsewhere.
Featured in
Related printers
