How Much Does 3D Printing Cost? Per Print, Per Month and Up Front
Most home prints cost cents to a few dollars, and filament is almost all of it. A worked breakdown of filament, electricity, resin and printer costs using November 2026 store prices and EIA power rates.
By 3DPrinterLab Team · Published · Updated
Short answer: once you own a printer, most home 3D prints cost a few cents to a few dollars each. Filament is almost all of it. At $23.99 per kilogram, a 50 gram PLA part uses about $1.20 of plastic, and a 3 hour print on a printer that averages 95 W uses about 5 cents of electricity at the US average residential rate. The bigger costs are the printer itself, failed prints and the extras you buy over time.
This guide shows how to work out the cost of any print yourself, with worked examples. Prices come from official stores and the electricity rate from the US Energy Information Administration (EIA), all read on November 19, 2026. We do not run lab tests; the power figures are the printer makers' own published measurements.
The formula
The running cost of one FDM print is:
- Filament cost = grams used x (spool price / spool grams)
- Electricity cost = average watts x print hours / 1,000 x your price per kWh
- Total = filament + electricity, plus an allowance for failed prints and wear parts
Your slicer tells you the grams and the print time before you print. Bambu Studio, PrusaSlicer and other slicers show both in the preview, so you can price a part before you commit to it.
Filament: the cost that matters most
Filament is sold by weight, usually in 1 kg spools. Prices we read on November 19, 2026:
- Prusament PLA (Prusa US store): $23.99 per 1 kg spool of Prusa Galaxy Black, on sale from $29.99.
- Prusament PETG (Prusa US store): 11 of the 12 1 kg colors on the first page of the category were $23.99, on sale from $29.99.
- ELEGOO PLA (ELEGOO store): $13.99 per 1 kg spool, though every color showed as sold out when we checked.
- ELEGOO PETG PRO (ELEGOO store): $14.49 per 1 kg spool, also showing sold out.
That puts plain PLA or PETG at roughly 1.4 to 3 cents per gram depending on brand and sale. Specialty filaments such as silk, matte, carbon-filled or engineering plastics cost more per gram.
Worked examples at $23.99 per kg (2.4 cents per gram):
- 15 g (a small clip, a keychain): about $0.36
- 50 g (a phone stand, a bracket): about $1.20
- 200 g (a large organizer, a vase): about $4.80
- 500 g (a cosplay helmet section, a big enclosure): about $12
At $13.99 per kg the same prints come to about $0.21, $0.70, $2.80 and $7.00.
If you are choosing between materials, our PLA vs PETG guide compares the two most common filaments, and the materials hub covers the rest.
Electricity: usually cents, not dollars
The EIA's Electric Power Monthly gives a US average residential electricity price of 18.16 cents per kWh for August 2026 (a preliminary figure, the latest month published). Your own rate may be higher or lower, so swap in the number from your bill.
Printer makers publish average power draw during printing:
- Bambu Lab A1 mini: 80 W average printing PLA
- Bambu Lab A1: 95 W average printing PLA
- Bambu Lab P1S: 105 W average printing PLA
- Bambu Lab H2D: 197 W average printing PLA (395 W average printing PC)
- Original Prusa MK-series: Prusa says 80 W printing generic PLA and 120 W printing generic ABS
Bambu's wiki also lists idle draw of roughly 4 to 10 W for the A1 mini, A1, P1S and X1C (25 to 27 W for the H2D), and separate figures for AMS units, which add a few watts while working.
Worked examples at 18.16 cents per kWh:
- A1 mini, 2 hour print: 0.16 kWh, about 3 cents
- A1, 3 hour print: 0.285 kWh, about 5 cents
- P1S, 10 hour print: 1.05 kWh, about 19 cents
- H2D, 10 hour PLA print: 1.97 kWh, about 36 cents
Even heavy use stays modest. An A1 printing 3 hours a day for 30 days at 95 W uses 8.55 kWh, about $1.55 a month at the average rate. Hotter materials raise the number: Prusa's own figures put ABS at 120 W against 80 W for PLA on the same printers.
Resin printing costs
Resin printers are priced the same way, by weight of resin used, but they add consumables that FDM printing does not. ELEGOO listed its 1 kg Standard Resin at $23.99 on November 19, 2026 (showing sold out at the time). A 30 gram batch of miniatures at that price uses about $0.72 of resin.
On top of the resin, budget for nitrile gloves, a cleaning liquid for washing prints (commonly isopropyl alcohol, or water for water-washable resins), and replacement release film over time. These extras vary too much by brand and habit for a single per-print figure. Our FDM vs resin guide covers the workflow difference in more detail.
The printer: the biggest one-time cost
The printer is the largest single expense, and it is a one-time cost spread across every print you make. Entry-level FDM printers from official stores can cost around $200. For example, Creality listed the Ender-3 V3 SE at $199 and Bambu Lab listed the A1 mini Combo (with the AMS lite for multicolor printing) at $359 before coupon codes on November 19, 2026. Prices move with sales, so treat these as a snapshot.
For current picks at each budget, see our best budget 3D printers, best 3D printers under $300 and the guide to the cheapest 3D printers worth buying, which explains why very cheap listings at $50 or less are usually a bad deal.
The costs people forget
- Failed prints. A print that detaches at hour six still used the filament and power. New owners fail more prints while learning, so add a margin to your estimates at first.
- Supports, brims and purge. Support material, brims and, on multicolor systems, the purge waste between color changes all add grams that are not part of the finished object. Your slicer's estimate includes them, so read the total, not the model alone.
- Wear parts. Nozzles, build plates and PTFE tubes wear out over time, faster with abrasive filled filaments.
- Storage and drying. Filament absorbs moisture. Makers such as Bambu Lab recommend storing spools sealed with desiccant, and a dry box or dryer is a common extra purchase.
- Your time. Printing is mostly unattended, but setup, removal and cleanup are real time.
Is 3D printing cheaper than buying?
For small replacement parts, organizers, custom mounts and hobby items, a home print often costs well under the retail price of a ready-made equivalent, because the material cost is so low. For mass-produced plastic items sold cheaply in stores, buying is usually cheaper once you count your time and failed prints. The answer depends on the object, not on 3D printing in general.
If you only need one or two parts, an online print service avoids buying a printer at all. Service prices depend on material, size and finish, and are quoted per part, so we have not listed a typical figure here.
A quick worksheet
- Open the model in your slicer and note grams and print time.
- Multiply grams by your spool's price per gram (spool price / 1,000 for a 1 kg spool).
- Multiply your printer's average watts by hours, divide by 1,000, and multiply by your price per kWh.
- Add the two, then add a margin for failures while you are learning.
Example: a 120 g PETG bracket, 6 hours on a printer averaging 105 W, filament at $23.99 per kg and power at 18.16 cents per kWh. Filament: 120 x 0.024 = $2.88. Power: 105 x 6 / 1,000 = 0.63 kWh, x $0.1816 = about $0.11. Total: about $3.
What we could not verify
- A typical price range for online 3D printing services. Quotes depend on each part.
- Average failure rates for home printers. They depend heavily on the printer, the material and the user.
- Power draw for printers whose makers do not publish an average printing figure.
How this guide was put together
We used published information only: filament and printer prices from the official Prusa, ELEGOO, Creality and Bambu Lab stores, power figures from Bambu Lab's wiki and Prusa's knowledge base, and the electricity price from the EIA, all read on November 19, 2026. 3DPrinterLab does not test printers; nothing here comes from hands-on testing. The sources are listed below.
Frequently asked questions
How much does it cost to 3D print something at home?
Mostly the filament. At $23.99 per kilogram, a 50 gram part uses about $1.20 of plastic. Electricity adds cents: a 3 hour print at 95 W uses about 0.29 kWh, roughly 5 cents at the US average residential rate of 18.16 cents per kWh (EIA, August 2026).
How much electricity does a 3D printer use?
Makers publish averages around 80 to 105 W for common desktop printers printing PLA: Bambu Lab lists 80 W for the A1 mini, 95 W for the A1 and 105 W for the P1S, and Prusa lists 80 W for its MK-series with PLA. Hotter materials draw more, for example 120 W for ABS on Prusa's MK-series.
How much does 3D printing cost per hour?
Electricity alone is about 1.5 to 2 cents per hour for a printer averaging 80 to 105 W at 18.16 cents per kWh. Filament is the larger part and depends on how many grams per hour your print uses, which your slicer shows.
Is 3D printing an expensive hobby?
The running costs are low; the printer is the main expense. An entry-level printer such as Creality's Ender-3 V3 SE was $199 at its official store, while filament costs about $14 to $30 per kilogram for plain PLA or PETG based on the store prices we read in November 2026.
Is resin printing more expensive than filament?
Per gram, resin and basic filament can be similar: ELEGOO listed 1 kg of Standard Resin at $23.99 in November 2026. Resin adds consumables such as gloves, cleaning liquid and release film, which raise the total per print.
Sources
- U.S. Energy Information Administration: Electric Power Monthly, Table 5.3 (August 2026 data, read 2026-11-19)
- Bambu Lab Wiki: Power consumption (read 2026-11-19)
- Prusa Knowledge Base: FAQ, power consumption (read 2026-11-19)
- Prusa Store: Prusament PLA Prusa Galaxy Black 1kg (price read 2026-11-19)
- Prusa Store: Prusament PETG category (prices read 2026-11-19)
- ELEGOO Store: PLA Filament 1kg (price read 2026-11-19)
- ELEGOO Store: PETG PRO Filament 1kg (price read 2026-11-19)
- ELEGOO Store: Standard Resin (price read 2026-11-19)
- Creality Store: Ender-3 V3 SE (price read 2026-11-19)
- Bambu Lab Store: A1 mini (price read 2026-11-19)
- Bambu Lab Store: PLA Basic (storage guidance, read 2026-11-19)